Yamaha Aluminum prop: 11–14 in pitch on 5 boats
In Yamaha's sea trials, both boats on the F70 ran the Yamaha Aluminum in 14 in of pitch. Across five boats and four engines, the pitch ran 11–14 in, and top speeds 26.1–33.4 knots.
The Yamaha Aluminum in the data.
- Maker
- Yamaha
- Line
- Aluminum
- Material
- aluminium
- Drive
- outboard
- Engines in the sea trials
- 4
- Pitches tested
- 11–14 in
- Diameters tested
- 10.25–13.625 in
Propbench is independent: not made by, sponsored by or affiliated with Yamaha. The names identify the products the sea trials ran.
What pitch the Yamaha Aluminum ran on each engine.
Show the numbers
| Engine | Boats | Most common pitch | Pitch range |
|---|---|---|---|
| Yamaha F70 | 2 | 14 in | 14 in |
| Yamaha F50LB (tiller) | 1 | – | 11 in |
| Yamaha F60LB | 1 | – | 14 in |
| Yamaha T50LB (High Thrust) | 1 | – | 13 in |
How much the props slipped at full throttle.
Across the five runs, apparent slip ran from 4 to 9 %. If your boat runs this line and slips well outside that band, it's worth a free check.
Apparent slip is how far the boat fell short of the speed its pitch and shaft rpm would give, wake included. How slip is worked out.
Full throttle against the maker's rpm range.
For every run we have Yamaha's full-throttle range for the engine. Four landed inside it and one above.
Yamaha's current pages give 5,000–6,000 rpm for the F50LB, F60LB and T50LB, and 5,300–6,300 rpm for the F70 (yamahaoutboards.com: F50LB, F60LB, F70 · T50LB).
Below the range, the engine can't make its full power; above it, the engine over-revs. The sheets don't say why for each run: load, water and prop all play a part.
Five boats tested with the Yamaha Aluminum.
| Boat | Engines | Prop | WOT rpm | Top speed | Source |
|---|---|---|---|---|---|
| Zodiac Bayrunner 500 | 1 × F60LB | 10.25 × 14 in | 5,900 | 33.4 kn | yamahaoutboards.com |
| Key West 1720 CC | 1 × F70 | 13.625 × 14 in | 6,300 | 29.3 kn | yamahaoutboards.com |
| Alumacraft Yukon 180 TL | 1 × F70 | 13.625 × 14 in | 6,250 | 28.9 kn | yamahaoutboards.com |
| Robalo R160 | 1 × T50LB | 13.625 × 13 in | 6,100 | 27.0 kn | yamahaoutboards.com |
| G3 Outfitter V167 T | 1 × F50LB | 11.625 × 11 in | 5,800 | 26.1 kn | yamahaoutboards.com |