Prop line · sea trials
Mercury Bravo Three prop: 23–28 in pitch on 8 boats
In Mercury's sea trials, the Bravo Three ran 24 in of pitch most often on the 8.2L MerCruiser 380: four of its five boats. Across eight boats and five engines, the pitch ran 23–28 in, and top speeds 39.5–48.8 knots.
Pitch tested23–28 inMercury's tests
Diameter tested15.5* inMercury's catalogue
Full throttle4,589–5,300rpm
Top speed39.5–48.8 knMercury's tests
Free check
Prop lineMercury Bravo Three
Boatyou enter it in the check
Your propyou enter it in the check
It's free, needs no account and takes about a minute.At a glance
The Mercury Bravo Three in the data.
- Maker
- Mercury
- Line
- Bravo Three
- Blades
- 4 (front prop)
- Rear prop
- 3 blades, 14* in
- Material
- stainless steel
- Drive
- sterndrive
- Engines in the sea trials
- 5
- Pitches tested
- 23–28 in
- Diameters tested
- 15.5* in
Propbench is independent: not made by, sponsored by or affiliated with Mercury. The names identify the products the sea trials ran.
Pitch on each engine
What pitch the Mercury Bravo Three ran on each engine.
Show the numbers
| Engine | Boats | Most common pitch | Pitch range |
|---|---|---|---|
| Mercury 8.2L MerCruiser 380 | 5 | 24 in | 24–28 in |
| Mercury 6.2L MerCruiser 300 | 3 | 24 in | 23–24 in |
| Mercury 6.2L MerCruiser 350 (2.20:1) | 2 | – | 24–28 in |
| Mercury 8.2L MerCruiser 430 | 2 | – | 24–26 in |
| Mercury 4.5L MerCruiser 200 | 1 | – | 23 in |
| Mercury 6.2L MerCruiser 350 (2.00:1) | 1 | – | 23 in |
Slip
How much the props slipped at full throttle.
Across 11 of the 15 runs, apparent slip ran from 9 to 14 %. Four sheets give no gear ratio, so slip can't be worked out there. If your boat runs this line and slips well outside that band, it's worth a free check.
Apparent slip is how far the boat fell short of the speed its pitch and shaft rpm would give, wake included. How slip is worked out.
Sea trials
15 runs on eight boats with the Mercury Bravo Three.
| Boat | Engines | Prop | WOT rpm | Top speed | Source |
|---|---|---|---|---|---|
| Chris-Craft Launch 35GT | 2 × 8.2L MerCruiser 430 | 15.5* × 24 in | 5,000 | 48.8 kn | performancedata.mercurymarine.com |
| Chris-Craft Launch 35GT | 2 × 8.2L MerCruiser 380 | 15.5* × 24 in | 4,800 | 46.5 kn | performancedata.mercurymarine.com |
| Chris-Craft Launch 25 GT | 1 × 8.2L MerCruiser 430 | 15.5* × 26 in | 5,050 | 46.5 kn | performancedata.mercurymarine.com |
| Sea Ray SLX 350 | 2 × 8.2L MerCruiser 380 | 15.5* × 28 in | 4,589 | 45.4 kn | performancedata.mercurymarine.com |
| Chris-Craft Launch 25 GT | 1 × 8.2L MerCruiser 380 | 15.5* × 26 in | 4,780 | 44.3 kn | performancedata.mercurymarine.com |
| Chris-Craft Launch 35GT | 2 × 6.2L MerCruiser 350 | 15.5* × 28 in | 5,250 | 43.8 kn | performancedata.mercurymarine.com |
| Chris-Craft Launch 25 GT | 1 × 8.2L MerCruiser 380 | 15.5* × 24 in | 5,000 | 43.7 kn | performancedata.mercurymarine.com |
| Chris-Craft Launch 25 GT | 1 × 6.2L MerCruiser 350 | 15.5* × 24 in | 5,300 | 42.9 kn | performancedata.mercurymarine.com |
| Sea Ray SDX 270 | 1 × 6.2L MerCruiser 300 | 15.5* × 24 in | 5,229 | 42.6 kn | performancedata.mercurymarine.com |
| Sea Ray SDX 290 | 1 × 8.2L MerCruiser 380 | 15.5* × 24 in | 4,846 | 41.4 kn | performancedata.mercurymarine.com |
| Sea Ray SLX 280 | 1 × 6.2L MerCruiser 350 | 15.5* × 23 in | 4,947 | 40.8 kn | performancedata.mercurymarine.com |
| Sea Ray SDX 250 | 1 × 6.2L MerCruiser 300 | 15.5* × 23 in | 5,237 | 40.3 kn | performancedata.mercurymarine.com |
| Sea Ray SLX 280 | 1 × 8.2L MerCruiser 380 | 15.5* × 24 in | 4,700 | 40.0 kn | performancedata.mercurymarine.com |
| Chris-Craft Launch 25 GT | 1 × 6.2L MerCruiser 300 | 15.5* × 24 in | 5,100 | 40.0 kn | performancedata.mercurymarine.com |
| Sea Ray SPX 230 | 1 × 4.5L MerCruiser 200 | 15.5* × 23 in | 5,040 | 39.5 kn | performancedata.mercurymarine.com |