Skip to content
propbench
Boat model · propeller and performance

Chris-Craft Launch 31GT top speed and prop

The Chris-Craft Launch 31GT reached 47.7 knots (54.9 mph) at 6,000 rpm in Mercury's test. It had two Verado 300s and props of 19 in pitch.

Length overall31 ft9.4 m
Beam10 ft3.0 m
Dry weight10,440 lb4,740 kg
Top speed47.7 knat 6,000 rpm in Mercury's test
Free checkPrefilled
BoatOutboard boat
Length31 ft
Engines2 × 300 hp
FuelPetrol
Your propyou enter it in the check
It's free, needs no account and takes about a minute.
Sea-trial record

What the Chris-Craft Launch 31GT ran.

Top speed47.7 kn
At6,000 rpm
Engines2 × 300 hp
Weight as tested≈ 12,100 lb
Source: performancedata.mercurymarine.com. Stainless four-blade Mercury Revolution 4 prop. We estimate the boat weighed about 12,100 lb (5,500 kg), from its dry weight. Sea trial M26.

Use this trial to check your own boat

Tell the free check your engine and the prop you run now. It tells you if the prop is right, and which way to go if it isn't.

Run a prop shop? Log the boat's sea trial in Pro, and we tune the calculation to that boat.

* The test gives pitch only; the diameter is from Mercury's prop catalogue.

Chris-Craft Launch 31GT

Speed through the rev range

It climbs onto the plane between 3,000 and 3,500 rpm. Speed jumps 9.3 kn in that step. Top speed is 47.7 kn at 6,000 rpm.
020401,0002,0003,0004,0005,0006,000Engine rpmSpeed (kn)600 rpm · 4.1 kn1,000 rpm · 5.3 kn1,500 rpm · 7.0 kn2,000 rpm · 8.1 kn2,500 rpm · 9.2 kn3,000 rpm · 14.2 kn3,500 rpm · 23.5 kn4,000 rpm · 29.2 kn4,500 rpm · 34.8 kn5,000 rpm · 39.5 kn5,500 rpm · 43.3 kn6,000 rpm · 47.7 knon the plane
020402,0004,0006,000Engine rpmSpeed (kn)600 rpm · 4.1 kn1,000 rpm · 5.3 kn1,500 rpm · 7.0 kn2,000 rpm · 8.1 kn2,500 rpm · 9.2 kn3,000 rpm · 14.2 kn3,500 rpm · 23.5 kn4,000 rpm · 29.2 kn4,500 rpm · 34.8 kn5,000 rpm · 39.5 kn5,500 rpm · 43.3 kn6,000 rpm · 47.7 knon the plane
Show the numbers
Engine rpmSpeed (kn)
6004.1
1,0005.3
1,5007.0
2,0008.1
2,5009.2
3,00014.2
3,50023.5
4,00029.2
4,50034.8
5,00039.5
5,50043.3
6,00047.7
Chris-Craft Launch 31GT

The same engines on other boats

With two Verado 300s and 14.6* × 19 in props, the Formula 310 BR HT reached 44.3 knots at 5,958 rpm.

With two Verado 300s and 14.6* × 19 in props, the Sailfish Mod320 reached 46.3 knots at 5,863 rpm.

With two Verado 300s and props of 20 in pitch, the Aviara AV32 reached 43.7 knots at 5,848 rpm.

Chris-Craft Launch 31GT

How the prop worked

At top speed the prop slipped about 6 %. The gear ratio brought shaft speed down to 3,243 rpm. With no slip, that pitch would have pushed the boat 50.7 kn. It made 47.7 kn.

The middle half of similar runabouts slipped 4–12 %. At about 6 %, the Chris-Craft Launch 31GT is in the middle of the pack.

At full throttle it ran 6,000 rpm, right at the rated 6,000.

Chris-Craft Launch 31GT

Acceleration

It went 0–20 mph (17 kn) in 5.6 s and 0–30 mph (26 kn) in 8.8 s.

Chris-Craft Launch 31GT

How it was tested

Mercury tested it on 17 October 2019 in salt water. The air was 29 °C and the wind 5 kn.

The test sheet doesn't record the number of people aboard, which affects both rpm and speed.

Chris-Craft Launch 31GT

Sources and method

We took every figure on this page from the test sheet or worked it out from its measurements: performancedata.mercurymarine.com, performancedata.mercurymarine.com.

Spotted an error? Write to hello@propbench.io and quote the sea trial’s number.

Related

Similar boats.

Sea trials of other runabouts close to the Chris-Craft Launch 31GT in length.

Check your own boat.

It's free and works with any prop brand.