Velocity 260 Bay top speed and prop
The Velocity 260 Bay reached 57.3 knots (65.9 mph) at 5,900 rpm in Boating Magazine's test. It had a Verado 350 and a 14.5 × 24 in prop.
What the Velocity 260 Bay ran.
Use this trial to check your own boat
Tell the free check your engine and the prop you run now. It tells you if the prop is right, and which way to go if it isn't.
Run a prop shop? Log the boat's sea trial in Pro, and we tune the calculation to that boat.
Speed through the rev range
Show the numbers
| Engine rpm | Speed (kn) |
|---|---|
| 1,000 | 4.9 |
| 1,500 | 6.8 |
| 2,000 | 7.8 |
| 2,500 | 11.1 |
| 3,500 | 27.9 |
| 4,500 | 37.9 |
| 5,000 | 43.1 |
| 5,500 | 49.5 |
| 5,900 | 57.3 |
How the prop worked
At top speed the prop slipped about 14 %. The gear ratio brought shaft speed down to 3,371 rpm. With no slip, that pitch would have pushed the boat 66.6 kn. It made 57.3 kn.
The Velocity 260 Bay slipped more than three in four similar boats. The middle half of them slipped 7–13 %.
At full throttle engine speed was 5,900 rpm, 500 rpm below the rated 6,400 rpm.
The same engine on other boats
With a Verado 350 and a prop of 16 in pitch, the Barletta 25LCU reached 43.9 knots at 6,436 rpm.
With a Verado 350 and a prop of 16 in pitch, the Barletta Lusso 25 UC reached 42.2 knots at 6,300 rpm.
With a Verado 350 and a prop of 17 in pitch, the Chris-Craft Launch 25 GT reached 45.3 knots at 6,350 rpm.
Sources and method
We took every figure on this page from the test sheet or worked it out from its measurements: boatingmag.com.
Spotted an error? Write to hello@propbench.io and quote the sea trial’s number.
Similar boats.
Sea trials of other similar boats close to the Velocity 260 Bay in length.