MasterCraft NXT23 top speed and prop
The MasterCraft NXT23 reached 29.6 knots (34.0 mph) at 5,200 rpm in Boating Magazine's test. It had an Ilmor 6.0L MPI 373 and a 15 × 15.25 in prop.
What the MasterCraft NXT23 ran.
Use this trial to check your own boat
Tell the free check your engine and the prop you run now. It tells you if the prop is right, and which way to go if it isn't.
Run a prop shop? Log the boat's sea trial in Pro, and we tune the calculation to that boat.
Speed through the rev range
Show the numbers
| Engine rpm | Speed (kn) |
|---|---|
| 1,000 | 3.7 |
| 1,500 | 5.2 |
| 2,000 | 6.6 |
| 2,500 | 7.5 |
| 3,000 | 10.3 |
| 3,500 | 17.4 |
| 4,000 | 22.4 |
| 4,500 | 26.2 |
| 5,000 | 28.9 |
| 5,200 | 29.6 |
How the prop worked
At top speed the prop slipped about 21 %. The gear ratio brought shaft speed down to 2,971 rpm. With no slip, that pitch would have pushed the boat 37.3 kn. It made 29.6 kn.
The MasterCraft NXT23 slipped more than three in four similar boats. The middle half of them slipped 13–19 %.
Boats of a similar length
Top speed and power of similar boats close to the MasterCraft NXT23 in length.
| Boat | Length | Power | Top speed |
|---|---|---|---|
| MasterCraft NXT23 | 23 ft | 1 × 373 hp | 29.6 kn |
| Centurion Fi23 | 23 ft | 1 × 409 hp | 30.4 kn |
| Centurion Ri230 | 23 ft | 1 × 450 hp | 33.0 kn |
| MasterCraft X22 | 22 ft 3 in | 1 × 440 hp | 33.3 kn |
| Centurion Fe22 | 22 ft | 1 × 409 hp | 34.2 kn |
Sources and method
We took every figure on this page from the test sheet or worked it out from its measurements: boatingmag.com.
Spotted an error? Write to hello@propbench.io and quote the sea trial’s number.
Similar boats.
Sea trials of other similar boats close to the MasterCraft NXT23 in length.